Paint Job: Paint Ninja 300 wheels bronze

chibit89 · 06-17-2018, 10:14 AM

Hola amigos,

Like the title says, I'm looking to outsource this. You'll need to have equipment to lift bike, take off wheels, and paint.

Please send me a quote at chibit89@ou.edu

swieland · 06-25-2018, 09:58 AM

POWDER COAT FOR BEST RESULTS!

chibit89 · 06-26-2018, 12:17 PM

Quote:

Originally Posted by swieland

POWDER COAT FOR BEST RESULTS!

if you have a person; i'd be more than happy to pay a reasonable rate!

Solracer · 06-26-2018, 12:41 PM

Quote:

Originally Posted by chibit89

Hola amigos,

Like the title says, I'm looking to outsource this. You'll need to have equipment to lift bike, take off wheels, and paint.

Please send me a quote at chibit89@ou.edu

MOST powdercoaters want JUST THE WHEELS, no bearings etc. and will not take the wheels and tires off.

We used to have a sponsor that would, but they have since closed down.

chibit89 · 06-26-2018, 12:42 PM

ah that's too bad. I'm not going to dig TOO hard but if someone had a person that was good; then i'd do it.

swieland · 06-26-2018, 04:13 PM

TIM. CONROE POWDERCOATING. 832-818-3905. Yes the wheels have to be off and bearings removed. Tires off also. Get blasted and then coated like new.
About $100. a wheel. / Tell him Stuart referred you.
Look and hold up excellent.

chibit89 · 06-27-2018, 02:43 PM

Quote:

Originally Posted by swieland

TIM. CONROE POWDERCOATING. 832-818-3905. Yes the wheels have to be off and bearings removed. Tires off also. Get blasted and then coated like new.
About $100. a wheel. / Tell him Stuart referred you.
Look and hold up excellent.

ty. i dont have means to take the wheel/tire off but this is a good reference.

obed · 06-27-2018, 03:22 PM

painters and coaters are not bike people, not mechanics...I do not know of anyone who is good at either who will mess with the bike... only the parts they are going to take care of for you...you might get one of the forum sponsors to take care of the disassembly for you.

albertinhouston · 06-29-2018, 08:25 AM

Quote:

Originally Posted by chibit89

Hola amigos,

Like the title says, I'm looking to outsource this. You'll need to have equipment to lift bike, take off wheels, and paint.

Please send me a quote at chibit89@ou.edu

obviously not your bike but do you know what those rims and swingarm are from?

Solracer · 06-29-2018, 08:55 AM

Quote:

Originally Posted by albertinhouston

obviously not your bike but do you know what those rims and swingarm are from?

The wheels look like they are from an R6 lol

Bevo · 06-29-2018, 09:08 AM

TomballD · 06-29-2018, 10:07 AM

Well at $100 an hour to pay a mechanic to remove wheels, tires and bearings/sprocket etc you are looking at almost $600-700 easily. I suggest you do some research on how to take your wheels off, and wait until you need new tires that will save you some serious time and re-installation fees etc.

Nastynesto85 · 06-29-2018, 10:10 AM

What side of town are you on ?

Bevo · 06-29-2018, 10:40 AM

Quote:

Originally Posted by TomballD

Well at $100 an hour to pay a mechanic to remove wheels, tires and bearings/sprocket etc you are looking at almost $600-700 easily. I suggest you do some research on how to take your wheels off, and wait until you need new tires that will save you some serious time and re-installation fees etc.

OP probably not interested in buying tools and stands.

06-17-2018, 10:14 AM	#1
chibit89 Member Join Date: Dec 2009 Feedback Rating: (1) Posts: 96 Experience: 2 years Trackdays: 1 Bike(s): Ninja 250r Red	Paint Job: Paint Ninja 300 wheels bronze Hola amigos, Like the title says, I'm looking to outsource this. You'll need to have equipment to lift bike, take off wheels, and paint. Please send me a quote at chibit89@ou.edu

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Paint Job: Paint Ninja 300 wheels bronze	chibit89	Jobs Section	0	06-17-2018 10:12 AM
Paint wheels?	RACER X	General Discussion (Moto Related)	2	06-24-2017 07:45 PM
What color to paint my wheels	CBR_Ryder	Off Topic	26	05-07-2007 03:55 PM
Should I paint my wheels, or no?	civicious	General Discussion (Moto Related)	27	02-07-2006 05:47 PM

06-27-2018, 03:22 PM	#8
obed TMGP Pimp Join Date: Aug 2011 Location: Houston Feedback Rating: (1) Posts: 7,701 Experience: 10+ years Trackdays: 10+ Bike(s): 2011 Honda CBR600RR Harley Road King Harley Sportster Yamaha TW200 Suzuki dirt bike	painters and coaters are not bike people, not mechanics...I do not know of anyone who is good at either who will mess with the bike... only the parts they are going to take care of for you...you might get one of the forum sponsors to take care of the disassembly for you.
	__________________ Be Free, Have Fun.... Give None, Take None

06-29-2018, 10:07 AM	#12
TomballD Senior Member Join Date: Jul 2009 Location: Tomball Feedback Rating: (5) Posts: 9,421 Experience: 10+ years Bike(s): DR350 XR50 TDub-200 XR100-Tarded 1981 XR80	Well at $100 an hour to pay a mechanic to remove wheels, tires and bearings/sprocket etc you are looking at almost $600-700 easily. I suggest you do some research on how to take your wheels off, and wait until you need new tires that will save you some serious time and re-installation fees etc.
	__________________ Danny

06-25-2018, 09:58 AM	#2
swieland Senior Member Join Date: Feb 2007 Location: montgomery Feedback Rating: (1) Posts: 128 Experience: 10+ years Bike(s): 14 street glide 12 cbr1000rr 81 cb750f & 82 900f 86 vfr 750f 83 CB1100F restomod	POWDER COAT FOR BEST RESULTS!

06-26-2018, 12:42 PM	#5
chibit89 Member Join Date: Dec 2009 Feedback Rating: (1) Posts: 96 Experience: 2 years Trackdays: 1 Bike(s): Ninja 250r Red	ah that's too bad. I'm not going to dig TOO hard but if someone had a person that was good; then i'd do it.

06-26-2018, 04:13 PM	#6
swieland Senior Member Join Date: Feb 2007 Location: montgomery Feedback Rating: (1) Posts: 128 Experience: 10+ years Bike(s): 14 street glide 12 cbr1000rr 81 cb750f & 82 900f 86 vfr 750f 83 CB1100F restomod	TIM. CONROE POWDERCOATING. 832-818-3905. Yes the wheels have to be off and bearings removed. Tires off also. Get blasted and then coated like new. About $100. a wheel. / Tell him Stuart referred you. Look and hold up excellent.