I'd like to have my '02 Aprilia RSV Mille's exhaust repaired — post your recommendations for a Houston-area shop that can do this sort of thing. Thanks!
Due to past crash damage, the exhaust midpipe is touching the rear suspension linkage (photos below), there's a big dent present, and the mufflers are at different heights. I believe the system is titanium; the mufflers definitely are.
(Don't mind the jack stands — using them to support the bike while the shock is being serviced.)
From the left side of the bike. Midpipe hits dogbone but clears side plates.
Close-up of the contact:
Pulling down on the muffler pipe allows the midpipe to clear the dogbone, but not by much. Returns to position above once released.
Right side for reference.
CMRA#672
