Welcome to MotoHouston.com! You are currently viewing our forums as a guest which gives you limited access to the community. By joining our free community you will have access to great discounts from our sponsors, the ability to post topics, communicate privately with other members, respond to polls, upload content, free email, classifieds, and access many other special features. Registration is fast, simple and absolutely free, join our community!
If you have any problems with the registration process or your account login, please contact us.
|Album Title||Pictures||Last Picture|
Vert's Green LEDs
Purchased LED Glow lighting kit (16 strips):
Installation time: 5 hours
|10||02-27-2020 03:03 PM|
Yoshimura Fender Eliminator Kit
||9||02-01-2020 02:37 AM|
Meet "Vert" ('18 Ninja 400 KRT)
Pics of "Vert" after I solo modified her. These include:
- Two Brothers Racing S1R Slip on
- Zero Gravity Racing Corsa Windscreen (Light Smoke)
- Puig Green foot pegs
- LED Glow Green lights
- Modified "trunk" for more space
- Tech Spec Tank grips
- Yoshimura Fender Eliminator
|6||12-04-2019 02:53 AM|
Tech Spec tank grips for the lower plastic fairings (aggressive adhesive).
Installation time: 30 minutes
I do not grip my tank with my thighs, this is why I did not place the tank grips on the tank. This bike is a Sport bike, not a Super Sport, so the lean angle isn't "aggressively forward". It is a slight tuck/forward lean, with the pegs directly under the seat. This positions my thighs on the black plastic fairings beneath the Tank. If you purchase from TechSpec and you want to place the grips on the plastic fairings, you will need the "aggressive adhesive". The "releasable adhesive" will work fine with the tank itself. The instructions suggest a heating gun or a hair dryer to heat the adhesive backing before application. I had neither, so I used the heat from my engine to warm the grips (yes, I placed them on the block and lowered the hood until they were HOT). This makes the application super simple!
|3||08-13-2019 01:50 AM|
Vert's modded trunk space
I removed the plastic partitions under the passenger seat and cut and placed a floor mat over the sharp edges that I created from cutting and twisting the plastic out. This made enough room for my tool kit, tire puncture repair kit and ALL of my LED wiring.
Installation time: 1.5 hours
|7||08-13-2019 01:36 AM|
Vert's Foot pegs
Puig Sport Green Foot pegs (HAWWWTTT!)
Installation time (for me): 2 hours (had an issue with a spring that didn't want to come off ...and a metal pin that flew off that I still NEEDED! Had to buy another pin the next day for it LOL. This process should take no longer than 30 minutes to complete if everything comes off like it's supposed to.
|4||08-13-2019 01:21 AM|
Vert's Slip on
Two Brothers Racing S1R Slip On
Install time (for me): 4 hrs (had issues with a grumpy bolt/nut combo)
|2||08-13-2019 01:08 AM|
Zero Gravity Racing Corsa Windscreen (Light Smoke)
Install time: 10 minutes
|2||08-13-2019 01:03 AM|