Register Members List Member Map Calendar Garage Forum Home Mark Forums Read

Go Back > TaiMc's Profile > Albums
Forgot info?

Welcome to! You are currently viewing our forums as a guest which gives you limited access to the community. By joining our free community you will have access to great discounts from our sponsors, the ability to post topics, communicate privately with other members, respond to polls, upload content, free email, classifieds, and access many other special features. Registration is fast, simple and absolutely free, join our community!

Register Today!

If you have any problems with the registration process or your account login, please contact us.

Vert's Grips
Tech Spec tank grips for the lower plastic fairings (aggressive adhesive).
Installation time: 30 minutes

I do not grip my tank with my thighs, this is why I did not place the tank grips on the tank. This bike is a Sport bike, not a Super Sport, so the lean angle isn't "aggressively forward". It is a slight tuck/forward lean, with the pegs directly under the seat. This positions my thighs on the black plastic fairings beneath the Tank. If you purchase from TechSpec and you want to place the grips on the plastic fairings, you will need the "aggressive adhesive". The "releasable adhesive" will work fine with the tank itself. The instructions suggest a heating gun or a hair dryer to heat the adhesive backing before application. I had neither, so I used the heat from my engine to warm the grips (yes, I placed them on the block and lowered the hood until they were HOT). This makes the application super simple!
pads mockup
pads applied
pads upclose

All times are GMT -6. The time now is 04:12 AM. is not responsible for the content posted by users.
Privacy Policy