Welcome to MotoHouston.com! You are currently viewing our forums as a guest which gives you limited access to the community. By joining our free community you will have access to great discounts from our sponsors, the ability to post topics, communicate privately with other members, respond to polls, upload content, free email, classifieds, and access many other special features. Registration is fast, simple and absolutely free, join our community!
If you have any problems with the registration process or your account login, please contact us.
|Like us on Facebook! Regular shirt GIVEAWAYS and more|
Share This Thread:
|Subscribe to this Thread||Thread Tools|
|12-20-2014, 05:40 PM||#1|
Join Date: Nov 2008
Feedback Rating: (0)
2015 Yamaha SR400 Is Made To Modify
Surviving original SR500s are popular candidates for customization due to their classic lines and mechanical simplicity, and Yamaha expects the SR400 to attract the same kind of attention. The new SR400 will surely be a good platform for café racer, scrambler, bobber, and street-tracker builds—the possibilities seem limitless with this cool little single.
Yamaha expects the SR to be a popular platform for customizers looking to build street trackers, café racers, and other retro-themed projects. Even before the new bike was released, Goings Moto had announced this beautiful bolt-on body kit for the new SR400 and earlier SR500s.
One simple option for customization is this bolt-on kit from Goings Moto (goingsmoto.com). Chad Goings, owner and chief engineer at Goings Moto, says he found inspiration for his body kit from famous Yamaha racebikes of the past.
The fiberglass body kit includes a front fender with integrated fork brace as well as a flat track-style solo seat. Check out goingsmoto.com for more information.
“The tail section pays homage to Giacomo Agostini ’s 1975 TZ500 OW23 but is elongated to capture the look of a flat-track bike. The front fender is modeled after Kenny Roberts ' 1980 World Champion YZR500. The fender has a built-in fork brace for added front-end stability.”
And while many builders will likely attack their projects with cutting torch in hand, Goings was committed to making this a bolt-on kit. “I know there are a lot people that want to have a custom bike, but they don’t have the ability to build one,” Goings says. “All you need for this kit is a 10-millimeter wrench.”
The parts are made from fiberglass and come ready for painting. The tail section sells for $400 (add another $100 for the seat shown above), while the front fender goes for $300. A rear fender-eliminator kit is also available for $80. Pricey stuff, but given that riders are scrambling to buy the $5,990 SR400—Yamaha says retail sales are 36-percent higher than expected, and it’s ramped up production in response. It’s clear what the little SR lacks in horsepower, it makes up for with inspirational power.
|Thread||Thread Starter||Forum||Replies||Last Post|
|SR400||gbalias||Vintage / Cafe Racers||6||09-10-2015 01:06 PM|