Welcome back to us :/ Our hosts data center was down for the entire day.
MotoHouston.com MotoHouston.com
Register Members List Member Map Media Calendar Garage Forum Home Mark Forums Read

Go Back   MotoHouston.com > Technical > How To's and Q & A's
Forgot info?

Welcome to MotoHouston.com! You are currently viewing our forums as a guest which gives you limited access to the community. By joining our free community you will have access to great discounts from our sponsors, the ability to post topics, communicate privately with other members, respond to polls, upload content, free email, classifieds, and access many other special features. Registration is fast, simple and absolutely free, join our community!

Register Today!

If you have any problems with the registration process or your account login, please contact us.


FREE MH Decals by MAIL!

Advertisement

Reply
Share This Thread: 
Subscribe to this Thread Thread Tools
Old 03-20-2007, 10:45 AM   #1
Somebody1010
CCS EX #62
 
Somebody1010's Avatar
 
Join Date: Nov 2005
Location: Nacogdoches
Feedback Rating: (1)
Posts: 1,756

Experience: 10+ years
Trackdays: 10+

Bike(s):
04 Suzuki 600 (Track only) 04 Kawi KX 250




Member Garage





Send a message via AIM to Somebody1010 Send a message via Yahoo to Somebody1010
Fixing Cracked Body Work

http://www.sportrider.com/tech/146_9510_hand/


Fixing Your Fractured Fairings
By Jason Black

1. If you own a faired motorcycle, chances are you've had the near-heart attack experience of pricing replacement bodywork. Whether you've simply dropped Your Precious off its sidestand or performed a full-on face skid, the dollar signs can quickly soar into the quadruple digits. But don't fret; there's hope yet. Put away the JB Weld, duct tape and plastic repair kit-there's an easier and more sano way.
146 9510 HAND 1K zoom
146 9510 HAND 2AK zoom
146 9510 HAND 2BK zoom
We had a partially damaged Body by Northstar tailsection that we put to the asphalt test at Daytona. The bodywork held up exceptionally well considering the severity of the crash, but still had a sizable hole and crack in the side. Note that this repair was done on a fiberglass section, but we have done the same procedure repeatedly with stock ABS fairings.

2. Begin by cleaning up the damaged area. Wipe it down with contact cleaner or acetone, first making sure that it will not damage the bodywork. Next, use 280-grit sandpaper to completely roughen the surface around the damage, both on the interior and exterior. If you have a grinder-bit attachment for a drill, this works extremely well. Failure to create a scored surface will keep the fiberglass material from bonding correctly.

3. Next comes the messy part, which can be potentially brain-damaging and/or hallucinogenic if you're not wearing a respirator. First, clean the area again. Then, cut out pieces of fiberglass mat or cloth (mat is slightly stronger but cloth is easier to work with) in the shape desired. Then mix the fiberglass resin with the catalyst as per the instructions on the box. One or two ounces is all that is needed for most repairs. Fiberglass repair kits are available at most auto parts stores, and make sure you pick up some latex surgical gloves at the same time-this stuff is sticky.
146 9510 HAND 3K zoom
146 9510 HAND 4AK zoom
146 9510 HAND 4BK zoom
146 9510 HAND 4CK zoom
Once the resin and catalyst have joined forces, you'll only have 20-25 minutes to work with the mixture before it begins to solidify. Use a paint brush and apply a thin layer of resin all around the interior damaged area.

4. Now take the pieces of fiberglass cloth and carefully place them in the desired area. Situate the cloth so it best resembles the original shape of the fairing; the better it looks now, the easier it will be to complete the project later. Work the resin up through the cloth with the brush in order to keep the fiberglass in place. Continue to dab on resin until the region is completely wet-but not saturated-and there are no visible wrinkles or bubbles. Remember that it's crucial to fiberglass the outside of any cracks to ensure there's no breakage later.

5. After the first layer has dried sufficiently, repeat the process, layering on more fiberglass while making sure not to exceed the original thickness of the fairing.

When the last application of cloth has dried entirely, use the grinder or 80-grit sandpaper to carefully knock down the excess fiberglass and resin-just make sure you don't grind all the way into the cloth, as that would weaken the structural integrity of the hardened fiberglass. Finally, scuff the entire area once again with 280-grit and clean it with acetone.
146 9510 HAND 5K zoom
6. The final step of the repair process involves making everything look right using polyester body filler (Bondo). Patience is the key when working with body filler. Do it right and nobody will know; do it wrong and your bike won't even pass the 50/50 beauty contest: 50 feet, 50 mph. If the area you're repairing is more than a few square inches, drill several very small holes in the fiberglass so the filler can squeeze through and secure itself to the fairing, similar to the function of finger holes in a bowling ball.
146 9510 HAND 6K zoom
7. Mix the filler and hardener according to the instructions on the can. Using a thin, rubber-spreading card, begin applying thin "skim" coats over the fiberglass, making sure that some filler squeezes through the holes on the first coat. Feather the mixture onto the surrounding painted surface; the idea is to blend the filler onto the existing fairing without creating a rough edge, and to make the filler best resemble the origi-nal shape of the fairing. Oh, and by the way, you best hurry up-polyester filler is unspreadable after two minutes.

8. Once the mixture has reached the consistency of your average block of Monterey Jack, start whittling it down with 80-grit sandpaper. Allow each application of filler to dry completely between coats, repeating the process until it is layered and sculpted to resemble the original fairing. For the final application, disperse a smooth layer of filler over the entire vicinity and let it dry. Sand it with 280-grit and then wet-sand it with 400-grit wet/dry sandpaper until you can no longer feel any scratches or imperfections in the plastic or filler.
146 9510 HAND 7AK zoom
146 9510 HAND 7BK zoom
146 9510 HAND 8K zoom
9. Just to demonstrate how good the final product looks, we shot on some white primer paint. When done properly, these methods are structurally sound and extremely effective. In fact, on the way home after our photo shoot, the tailsection fell out of the back of the SR Toyota T100 and landed right on the repaired area at 40 mph. There was no damage other than a few scratches.
146 9510 HAND 9AK zoom
146 9510 HAND 9BK zoom
146 9510 HAND SBK zoom
So next time you find yourself staring at a cracked and splintered fairing, break out the fiberglass and body filler and give it a try. With a little patience, you'll have a good-looking fairing and a thicker wallet.

How and why

Our partially destroyed guinea pig bodywork was volunteered by Body by Northstar (612/252-2924). All other supplies were acquired at a local auto parts store for the grand sum of $15. Not bad when compared with the cost of a new fairing. To prep your repair job for painting, see "Hands On," August '94. To complete a fairing rebuild, you will need the following supplies:

80-, 280- and 400-grit sandpaper
Acetone or contact cleaner
Latex surgical gloves
Spreading cards
Fiberglass cloth, resin and hardener (all available in a fiberglass body repair kit)
Polyester body filler (Bondo)
Scissors
Mixing sticks
Respirator (optional but strongly recommended)



This article originally appeared in the October 1995 issue of Sport Rider.
__________________
Toms Paint and Body
CCS EX # 62
Somebody1010 is offline   Reply With Quote
Similar Topics
Thread Thread Starter Forum Replies Last Post
Fixing Cracked Body Work Somebody1010 Motorcycle Articles 17 02-25-2012 12:31 AM
Need some body work Squoddybody General Discussion (Moto Related) 8 10-21-2011 10:13 AM
Looking for someone who does body work. Redux Car Forum 3 03-06-2011 12:40 AM
body work FasterFaster Performance and Modifications 2 03-24-2008 02:01 PM
body work? Mike R1 Taking it to the Track 4 03-08-2007 12:13 PM
Advertisement
Old 03-20-2007, 10:47 AM   #2
BigComfy
Senior Member
 
BigComfy's Avatar
 
Join Date: Jun 2005
Location: under a rock
Feedback Rating: (3)
Posts: 24,335

Experience: 1-3 months
Trackdays: 10+

Bike(s):
SV1k (sold)
CRB6 Track Bike (sold)
Daytona 1200 (parted)
1st Gen FZ1 (sold)
1st Gen SV650 (sold)

Member Garage


sticky please
__________________
"I haven't seen the crash, but I think Marc needs to be penalized for two or three seasons! Until I stop racing!"-VR46
BigComfy is offline   Reply With Quote
Old 03-20-2007, 10:58 AM   #3
Somebody1010
CCS EX #62
 
Somebody1010's Avatar
 
Join Date: Nov 2005
Location: Nacogdoches
Feedback Rating: (1)
Posts: 1,756

Experience: 10+ years
Trackdays: 10+

Bike(s):
04 Suzuki 600 (Track only) 04 Kawi KX 250




Member Garage





Send a message via AIM to Somebody1010 Send a message via Yahoo to Somebody1010
figured i would add something with some value to MH
__________________
Toms Paint and Body
CCS EX # 62
Somebody1010 is offline   Reply With Quote
Old 03-21-2007, 08:37 PM   #4
jrock
straight shooter
 
jrock's Avatar
 
Join Date: Mar 2006
Location: back n H-Twn
Feedback Rating: (0)
Posts: 11,684

Experience: 10+ years
Trackdays: 10+

Bike(s):
2003 Kawi ZX9r Green Machine-sold
1995 Honda CB 1000 Big One








Send a message via Yahoo to jrock
good post!!
Needed it about a month ago but good find indeed.
__________________
"I get a total charge out of inspiring others to follow their dreams and not to fear change. Embrace it. Realize that money isn't the end-all, be-all. What is important, what really has value, is Time. As motorcyclists, we all face increased risks on the road, and on the track. Do something with your time; don't have a bag full of regrets when the train comes to a stop. "
jrock is offline   Reply With Quote
Old 03-21-2007, 09:09 PM   #5
Scorpio
Twist the Grip, Let'r Rip
 
Scorpio's Avatar
 
Join Date: May 2005
Location: Shmearth
Feedback Rating: (6)
Posts: 12,292

Experience: 10+ years
Trackdays: 10+


450x sumo (sold)
RC51 (sold)
Honda Grom 125(sold)

Member Garage





Send a message via AIM to Scorpio
yes,
the mini will be needing a whole lotta that stuff pretty soon at the rate we're going.
good info.
Scorpio is offline   Reply With Quote
Old 03-21-2007, 09:30 PM   #6
xtnomad
Member
 
xtnomad's Avatar
 
Join Date: Apr 2006
Feedback Rating: (0)
Posts: 47


Bike(s):
TY 350 Mono,XL500S (SOLD),VX800 (SOLD) Triumph ST(SOLD)









There are a few differant tricks pepole use but mostly the same results. This is text book. Gelcoat works best with microspheres in the mix, it can cover up 24g scratchs. This reminds me of my boat yard days that I was covered with glass every day. And the 3 x 100 foot rolls of cloth in the garage, any offers? I think I starting to itch.
__________________
The guy behind the camera:offtheair
Back in the saddle again!
xtnomad is offline   Reply With Quote
Old 03-22-2007, 01:55 AM   #7
houseofpaint
PM for BESTPRICE on parts
 
houseofpaint's Avatar
 
Join Date: Jul 2006
Location: Spring, TX
Feedback Rating: (7)
Posts: 9,486

Experience: 10+ years
Trackdays: 10+

Bike(s):
2010 Yamaha R1 racebike
2012 GSXR750 Racebike
2003 DRZ125 semiflattracker


Member Garage





Send a message via AIM to houseofpaint
depends on the plastic.......all plastics have a code of some sort if you look on the back of the plastic.....

i typically plastic weld, but there is like 8 different kinds of plastics, some cannot be plastic welded. there are many different adhesives and fillers for different types of plastics, using the wrong one for the wrong plastic, most likely will not hold long.
__________________
www.facebook.com/HouseOfPaintDesigns
Follow us on Instagram @hopdesigns

Custom Paint, Powdercoating, and Collision repair (Cars and bikes)[/b]
houseofpaint is offline   Reply With Quote
Old 09-08-2008, 08:43 PM   #8
THE DEAN OF LEAN
CMRA/WERA #171 AMA#771
 
THE DEAN OF LEAN's Avatar
 
Join Date: Mar 2008
Location: Houston
Feedback Rating: (2)
Posts: 2,996

Experience: 3 years
Trackdays: 10+

Bike(s):
GSXR 600 Race Bike




Member Garage


Quote:
Originally Posted by houseofpain View Post
depends on the plastic.......all plastics have a code of some sort if you look on the back of the plastic.....

i typically plastic weld, but there is like 8 different kinds of plastics, some cannot be plastic welded. there are many different adhesives and fillers for different types of plastics, using the wrong one for the wrong plastic, most likely will not hold long.
where is the code at? and what will it say! better yet, I think I have gp bodywork, know whats best for me to use?
__________________
tj
www.TRACK-JUNKIE.com
THE DEAN OF LEAN is offline   Reply With Quote
Old 09-08-2008, 08:46 PM   #9
Somebody1010
CCS EX #62
 
Somebody1010's Avatar
 
Join Date: Nov 2005
Location: Nacogdoches
Feedback Rating: (1)
Posts: 1,756

Experience: 10+ years
Trackdays: 10+

Bike(s):
04 Suzuki 600 (Track only) 04 Kawi KX 250




Member Garage





Send a message via AIM to Somebody1010 Send a message via Yahoo to Somebody1010
Im pretty sure your stuff is fiberglass so go with the meathod above. Take your time on it though to get it smooth and looking good again.
__________________
Toms Paint and Body
CCS EX # 62
Somebody1010 is offline   Reply With Quote
Old 09-25-2008, 11:23 AM   #10
Heytalktoryan
Senior Member
 
Heytalktoryan's Avatar
 
Join Date: Jul 2008
Feedback Rating: (1)
Posts: 236












Good lord i help this can help me fix my bicycle.
__________________
Ryan J
Heytalktoryan is offline   Reply With Quote
Old 01-12-2009, 09:39 PM   #11
1slocbr
Banned
 
Join Date: Nov 2008
Location: Ethiopia
Feedback Rating: (2)
Posts: 2,737

Experience: 1-3 months
Trackdays: 1

Bike(s):
junk grand
junk 6








User is banned

.
1slocbr is offline   Reply With Quote
Old 02-10-2009, 06:10 PM   #12
TRD23
Thats MR. to you.
 
Join Date: Sep 2005
Feedback Rating: (0)
Posts: 161


Bike(s):
01 ZX6R









yeah ive been using plastix repair. works like a charm. probably do the fiberglass for major repairs
TRD23 is offline   Reply With Quote
Reply


Thread Tools

Advertisement


All times are GMT -5. The time now is 08:02 PM.


MotoHouston.com is not responsible for the content posted by users.
Privacy Policy