08 Busa mod. update - Page 8

bluewave18 · 02-03-2010, 11:39 PM

I have a hard time not doing it on Red Bluff. Its by the house and Im not worried about cops there.

cooter10 · 02-08-2010, 11:11 AM

I remember a Supra run on Red Bluff late one night....good times.

bluewave18 · 02-08-2010, 11:45 AM

I dont

bluewave18 · 03-13-2010, 01:52 AM

I will add pics from the tune session I did today very soon. Keep an eye out for a motor rebuild. Nitrous was fun for less than 12 hrs. Who would have thought that a well tuned 36 hp shot would do the motor in? I think I made about 6 passes. Time for the head work the bike needed anyway. I see more dope in the bikes future.

JOEBUSA · 03-13-2010, 01:59 AM

Congrats on the 9.11 pass

bluewave18 · 03-13-2010, 02:02 AM

That was only 60% in first with a .5 sec build time. The 80% with a .3 sec. build didnt go well as you know. But thanks. That 8.99 isnt far. Maybe it will do it after the rebuild.

JOEBUSA · 03-13-2010, 02:07 AM

Hope she's not hurt too bad

bluewave18 · 03-13-2010, 09:13 AM

Gonna check the air box for all of the spider bar parts first.

bluewave18 · 03-13-2010, 12:51 PM

Motor hp was down 14hp to begin with. May be due to the heavier tire and real heavy and long chain. Look how the controller brings it on at 6000 RPM on the dot.

bluewave18 · 03-13-2010, 01:07 PM

excuse the rubber and dirt

Had a problem with the filter or the regulator. I took both off

Gonna start tearing it down asap to see what I broke last night.

bluewave18 · 03-13-2010, 03:19 PM

Looking down the tb's I can see that the valves are still there. The plugs show no sign of detonation. Got to leave it alone for now. Im optimistic that a shim is out of place. Damn weak 08 springs.

JOEBUSA · 03-13-2010, 10:21 PM

Go Big or Go broke!

bluewave18 · 03-14-2010, 02:30 PM

I dont really like the sound of either.

WWFII · 03-15-2010, 02:42 PM

Just slap a turbo on that biatch!

yeoljb · 03-15-2010, 03:00 PM

Quote:

Originally Posted by bluewave18

excuse the rubber and dirt

Had a problem with the filter or the regulator. I took both off

Gonna start tearing it down asap to see what I broke last night.

Where are the pics of that bad a$$ 1000????

bluewave18 · 03-15-2010, 04:36 PM

This one?

bluewave18 · 03-15-2010, 09:57 PM

Update on hurt motor. I lost a shim on the #3 cylinder on the exhaust side. Stock s/s valves, Carpenter springs, and mo nitrous on the way.

WWFII · 03-16-2010, 07:16 AM

Quote:

Originally Posted by bluewave18

Update on hurt motor. I lost a shim on the #3 cylinder on the exhaust side. Stock s/s valves, Carpenter springs, and mo nitrous on the way.

Congratulations! So, I guess it was not too serious!

bluewave18 · 03-16-2010, 07:38 AM

Not serious. Its still gonna cost a grand to fix/upgrade. Wife says my "little" hobby is getting expensive.

yeoljb · 03-16-2010, 07:55 AM

Quote:

Originally Posted by bluewave18

This one?

What's up with the size? Your pics are huge and mine looks like an avatar pic.......

02-03-2010, 11:39 PM	#141
bluewave18 Safety Third Join Date: Oct 2007 Location: S.E. Feedback Rating: (0) Posts: 9,866 Experience: 10+ years Bike(s): 08 Busa 03 XR 50	I have a hard time not doing it on Red Bluff. Its by the house and Im not worried about cops there.

02-08-2010, 11:11 AM	#142
cooter10 Member Join Date: Feb 2010 Feedback Rating: (0) Posts: 1	I remember a Supra run on Red Bluff late one night....good times.

02-08-2010, 11:45 AM	#143
bluewave18 Safety Third Join Date: Oct 2007 Location: S.E. Feedback Rating: (0) Posts: 9,866 Experience: 10+ years Bike(s): 08 Busa 03 XR 50	I dont

03-13-2010, 01:52 AM	#144
bluewave18 Safety Third Join Date: Oct 2007 Location: S.E. Feedback Rating: (0) Posts: 9,866 Experience: 10+ years Bike(s): 08 Busa 03 XR 50	I will add pics from the tune session I did today very soon. Keep an eye out for a motor rebuild. Nitrous was fun for less than 12 hrs. Who would have thought that a well tuned 36 hp shot would do the motor in? I think I made about 6 passes. Time for the head work the bike needed anyway. I see more dope in the bikes future.

03-13-2010, 01:59 AM	#145
JOEBUSA Senior Member Join Date: Jun 2008 Location: The REEVER Feedback Rating: (0) Posts: 2,053 Experience: 2 years Bike(s): '08 Busa 186 HP '07 Raptor 700 (quad)	Congrats on the 9.11 pass

03-13-2010, 02:02 AM	#146
bluewave18 Safety Third Join Date: Oct 2007 Location: S.E. Feedback Rating: (0) Posts: 9,866 Experience: 10+ years Bike(s): 08 Busa 03 XR 50	That was only 60% in first with a .5 sec build time. The 80% with a .3 sec. build didnt go well as you know. But thanks. That 8.99 isnt far. Maybe it will do it after the rebuild.

03-13-2010, 02:07 AM	#147
JOEBUSA Senior Member Join Date: Jun 2008 Location: The REEVER Feedback Rating: (0) Posts: 2,053 Experience: 2 years Bike(s): '08 Busa 186 HP '07 Raptor 700 (quad)	Hope she's not hurt too bad

03-13-2010, 09:13 AM	#148
bluewave18 Safety Third Join Date: Oct 2007 Location: S.E. Feedback Rating: (0) Posts: 9,866 Experience: 10+ years Bike(s): 08 Busa 03 XR 50	Gonna check the air box for all of the spider bar parts first.

03-13-2010, 12:51 PM	#149
bluewave18 Safety Third Join Date: Oct 2007 Location: S.E. Feedback Rating: (0) Posts: 9,866 Experience: 10+ years Bike(s): 08 Busa 03 XR 50	Motor hp was down 14hp to begin with. May be due to the heavier tire and real heavy and long chain. Look how the controller brings it on at 6000 RPM on the dot.

03-13-2010, 01:07 PM	#150
bluewave18 Safety Third Join Date: Oct 2007 Location: S.E. Feedback Rating: (0) Posts: 9,866 Experience: 10+ years Bike(s): 08 Busa 03 XR 50	excuse the rubber and dirt Had a problem with the filter or the regulator. I took both off Gonna start tearing it down asap to see what I broke last night.

03-13-2010, 03:19 PM	#151
bluewave18 Safety Third Join Date: Oct 2007 Location: S.E. Feedback Rating: (0) Posts: 9,866 Experience: 10+ years Bike(s): 08 Busa 03 XR 50	Looking down the tb's I can see that the valves are still there. The plugs show no sign of detonation. Got to leave it alone for now. Im optimistic that a shim is out of place. Damn weak 08 springs.

03-13-2010, 10:21 PM	#152
JOEBUSA Senior Member Join Date: Jun 2008 Location: The REEVER Feedback Rating: (0) Posts: 2,053 Experience: 2 years Bike(s): '08 Busa 186 HP '07 Raptor 700 (quad)	Go Big or Go broke!

03-14-2010, 02:30 PM	#153
bluewave18 Safety Third Join Date: Oct 2007 Location: S.E. Feedback Rating: (0) Posts: 9,866 Experience: 10+ years Bike(s): 08 Busa 03 XR 50	I dont really like the sound of either.

03-15-2010, 02:42 PM	#154
WWFII Senior Member Join Date: Feb 2010 Location: Where I lay my head is home. Feedback Rating: (0) Posts: 427 Experience: 2 years Bike(s): K8 Hayabusa	Just slap a turbo on that biatch!

03-15-2010, 04:36 PM	#156
bluewave18 Safety Third Join Date: Oct 2007 Location: S.E. Feedback Rating: (0) Posts: 9,866 Experience: 10+ years Bike(s): 08 Busa 03 XR 50	This one?

03-15-2010, 09:57 PM	#157
bluewave18 Safety Third Join Date: Oct 2007 Location: S.E. Feedback Rating: (0) Posts: 9,866 Experience: 10+ years Bike(s): 08 Busa 03 XR 50	Update on hurt motor. I lost a shim on the #3 cylinder on the exhaust side. Stock s/s valves, Carpenter springs, and mo nitrous on the way.

03-16-2010, 07:38 AM	#159
bluewave18 Safety Third Join Date: Oct 2007 Location: S.E. Feedback Rating: (0) Posts: 9,866 Experience: 10+ years Bike(s): 08 Busa 03 XR 50	Not serious. Its still gonna cost a grand to fix/upgrade. Wife says my "little" hobby is getting expensive.