Fiddy question

[BuffaloRider13]

I just got a fiddy from a guy on here... It needs a rear brake caliper... Where can I get one. Im not sure what kind it is, but They all look pretty much the same. Any tips???

[del240z]

http://www.motohouston.com/forums/showthread.php?t=7189


All the links ya need.....:thumb:

[mekrew]

a caliper ?

you mean rear drum ?

[ANTISOCIAL]

e-bay

[ANTISOCIAL]

I just got a fiddy from a guy on here... It needs a rear brake caliper... Where can I get one. Im not sure what kind it is, but They all look pretty much the same. Any tips??? pic's ??

[BuffaloRider13]

a caliper ?

you mean rear drum ?

No it has a disc set up on it... Il lpost some pics.. .let me go take some

[BuffaloRider13]

http://i242.photobucket.com/albums/ff280/buffalorider13/012.jpg
http://i242.photobucket.com/albums/ff280/buffalorider13/01deleted

Here is a pic of it...
http://i242.photobucket.com/albums/ff280/buffalorider13/008-1.jpg



http://i242.photobucket.com/albums/ff280/buffalorider13/016-1.jpg

[OMEGA]

dam t thats bad lookin you get this today?

[josh302]

harwin, toys4less, take the bike with you.

[BuffaloRider13]

dam t thats bad lookin you get this today?

Yeah... He is gonna throw in a honda 50 motor to... Im gonna put that in it.

[BuffaloRider13]

harwin, toys4less, take the bike with you.

I would but dont have a truck, or big enough car... Where is this place, and do they sell chinese stuff... I think thats what it is... It actually looks just like the roketa...

[infidel]

i got a caliper in the garage that might work for you.

[Solracer]

that bike looks ODDLY familiar..........lol

[BuffaloRider13]

i got a caliper in the garage that might work for you.

No crap!!!!! PM me... I need one baaaaad... Im gonna try to do a hand brake, but if i dont have any brake, that will be hard.

[Solracer]

THIS is what he needs
http://www.motohouston.com/images/DSC00055.JPG






look familiar? :keke:
http://www.motohouston.com/images/DSC00059.JPG

[infidel]

No crap!!!!! PM me... I need one baaaaad... Im gonna try to do a hand brake, but if i dont have any brake, that will be hard.i ned to see if its a fro tor rear and if it works on both. im not at home so ill check tomorrow for ya.or pm josh302 and ask him to look for you . its there jst gotta see if it will work for you

[BuffaloRider13]

Hey solo is this your old bike?

[Solracer]

Hey solo is this your old bike?

:nod: MY recomendation, keep THAT motor its the best of the best knockoffs,

I had someone tail gate me and they were doing 55.... I could have gone 56 or 57 if i had had more room.

[BuffaloRider13]

Well there are many missing parts.. And the stator is bad.. I have no idea what it is so i cant find parts... Do you know

[Solracer]

not off hand...

[BuffaloRider13]

Dam.... where did you get it, Was it a place in town?

[infidel]

go off harwin toys4less sells the db19's and has parts for it.

[Solracer]

Yeh, harwin would be your best bet, I saw some of them there...


back when I had it, they sold for 1499.

the model # is QG-214-XR

[Solracer]

http://coolsterpitbikesales.com/products.htm

[BuffaloRider13]

Sweeeeeet... I really hope I can get the parts for it. I am ready to stunt this bad boy. I wish It was running

[ANTISOCIAL]

gpx 124cc 385 +shipping ^ I'm just saying it's an option

[BuffaloRider13]

Man i want your f4i...lol... i just got this about 4 hours ago.. I was gonna get a new one, but i figured I would give this a try.

[ANTISOCIAL]

I was just talkin bout a new motor for your bike .

[BuffaloRider13]

Oh... Where is that from?

[ANTISOCIAL]

e-bay

[BuffaloRider13]

I wonder if this is what i need... Dam i wish i could just try it on. What are the odds that they would have these parts at toys for less???
http://www.partsforscooters.com/Hydraulic-Brake-Kit?sc=9&category=392

[josh302]

gpx 124cc 385 +shipping ^ I'm just saying it's an option
if you are going to be a bear, why not a grizzly? 140cc, complete, warranty and oil cooler 325.00
http://www.sgr-usa.com/product_info.php?cPath=143&products_id=278&osCsid=25f0b5920b17ea13818a25042d61687e
I order from these guys all the time. use promo code 2008 when you are checking out, good for 10% off, and shipping on anything is 5.00 flat rate.

[BuffaloRider13]

Well i just want this is a stunter.. Im probably not ever gonna ride it off road. I just want something i can throw around in a parking lot. The guy is gonna give me a engine anyways. Im not sure how well it will perform, But i hope well! what I really need is a caliper! Well and some nuts and bolts to hold the plastics on.

[josh302]

Imo you are wasting your time, it will not stunt for shite.

[BuffaloRider13]

We went out stunting this weekend on almost indetiacal bikes. They did fine. Well except for the broken brake lever when gumby fell.. But we had a blast on them

[BuffaloRider13]

So this thing needs alot. Will a crf 50 motor be enough to pull this bike and do wheelies? Also will the carb from the 110 work properly with the 50 motor.. HELP GUYS

[stunt-r]

gosh that bike looks retarded with crf50 plastics and those big ass wheels

[BuffaloRider13]

gosh that bike looks retarded with crf50 plastics and those big ass wheels

Yeah i know... I wish the dam thing ran.. Your kicks ass man.. I wish i had something like that! Where did you get the 117 motor?

[ANTISOCIAL]

if you are going to be a bear, why not a grizzly? 140cc, complete, warranty and oil cooler 325.00
http://www.sgr-usa.com/product_info.php?cPath=143&products_id=278&osCsid=25f0b5920b17ea13818a25042d61687e
I order from these guys all the time. use promo code 2008 when you are checking out, good for 10% off, and shipping on anything is 5.00 flat rate.
I guess i have to be a bear cause i bought the gpx motor about 2 weeks ago and it's now in my bike . I like the motor the clutch is hard to pull, but it's nice having more power.

[ANTISOCIAL]

Yeah i know... I wish the dam thing ran.. Your kicks ass man.. I wish i had something like that! Where did you get the 117 motor?
I have a stock crf 50 motor 2005(complete w/harness and everything needed to run excluding the exhaust) i might sell .

[BuffaloRider13]

What did you do with the old engine???

[ANTISOCIAL]

me or him ?

[BuffaloRider13]

You... And do you have a honda, or a knock off

[ANTISOCIAL]

It's a HONDA crf50 motor i took it out of my 50 and put a gpx motor in it .

[BuffaloRider13]

Ahhh.. Well the guy i got this from is going to give me a 50 motor to put in it... But it has to be built.. And i dont know exactly ill need off it to run the bike.. Wires, coils, carb...ext

[stunt-r]

Yeah i know... I wish the dam thing ran.. Your kicks ass man.. I wish i had something like that! Where did you get the 117 motor?

its a honda motor with a 117 kit on it

[BuffaloRider13]

Ah... Its very nice.. Im starting to wonder if i will ever be able to get this thing going

[stunt-r]

Ah... Its very nice.. Im starting to wonder if i will ever be able to get this thing going

dude sell it and go with a honda

[BuffaloRider13]

I would but im not sure anyone would buy it... Plus i dont have the $ to buy a honda... I traded some stuff for this bike. I just hope i can fund everything I need!

[josh302]

ok, i cant sit back and watch any longer.

A stock honda 50 motor will NOT power that bike. Your best bet is to go with a lifan or gpx motor, they come with 4 speed tranny and manual clutch.

these motors are available for 150-1500 dependng on how much you want to spend.

Downside:
it is simple geometry, balance of the bike.

The long swing-arm and big forks of the "off-road" style 50s, changes the geometry of the bike, it makes the the front end alot heavier.(bad for stunt)

The balance point on a stock style 50 has like a 30% error margin, where the long swing-arm bikes have 5%.

I know what some people are going to say, "I wheelie my big bike fine, and it is longer than the off road 50", the weight to lenght is balanced is why big bikes wheelie good, add 2 inches to your swing arm and see how horrible the big bike will wheelie.

I am not saying it is impossible, I am just speaking from personal experience, I have built many bikes, including stock to exteam off road applications, the stock style forks and swingarms stunt the best, the long swinger and big forks are for "off road" use and are difficult to stunt.

[ANTISOCIAL]

^ I agree my modded 50 +2 frame +2 swingarm def. ='s my new name for my bike (THE LIMO BIKE) It's nothing at all like stock and def. alot harder to stunt.

[BuffaloRider13]

Thats what i have been thinking. I didnt think a 50 motor ould be enough..

[Solracer]

Harder to stunt? Yes. But that bike was hella fun.

It has a zongshen motor in it.

[BuffaloRider13]

But the motor is taken apart, and has parts missing.. And the wires are cut on it.. I would just go but parts for it, but i dont think its fixible...

[Solracer]

anything is fixable, whats your budget

[BuffaloRider13]

haha... not much. I just want to find another 110 motor to put in it.. I cant find them any where i can just go get it.. I know someone has one of these things in there garage they dont want.

[josh302]

haha... not much. I just want to find another 110 motor to put in it.. I cant find them any where i can just go get it.. I know someone has one of these things in there garage they dont want.
I have a 124cc motor that will work, and probably the rear brake stuff too. Let me know what you budget is, we may be able to work somthing out. does that bike still have the cdi, and coil? that is probably all you will need.

[BuffaloRider13]

well i dont really have one right now. If you can tell me how much its worth to you, i can see what i can round up.. I have the coil and all that, its just a birds nest..