Power Commander tuning center

[SF7R]

Any recommendations for good shop that can install and tune a Power Commander - preferably with a dyno and "Dynojet Fuel Injection Tuning Link" software.

[DANtheMan.]

Im guessing MU :dontknow:

[Patrick]

What mods have you done to your bike?
If it's close to stock inernally you won't really realize any noticeable gain from a custom map.
However if you're hell bent on one, I can get it done for you.

[Chris24]

put in your zip code over on the right:

http://www.powercommander.com/powercommander_iii_usb/default.aspx

[RACER X]

metric motorcycles can custom map. 713-334-8030

but as patrick said, unless you have some mods, it's not gonna help alot.

[magzx12r]

You don't have to have mods to get the benefit from a Power Commander with a good map. Just ask the RC-51 guys.

[Metzzen1]

You don't have to have mods to get the benefit from a Power Commander with a good map. Just ask the RC-51 guys.

The maps that they have on the website are alot better than stock and are usually good enough for the common punk with a slip on and air filter. IMO its not worth the $400 that is necessary for a full dyno tune when running stock cams/internals.....just my 2 cents

[less_than_coop]

Patrick or another shop might have something already built up and saved on a computer. Give a phone call and see. Then you'll have easy tunability with the PCIII when you do more mods. It will grow with the bike.

[10mm]

Throw us in the mix, too. We've got a lot of Honda experience.

Northwest Honda
Service 281-447-0316

[Buck Beasley]

NW Honda is only 200.00 and they do it while you wait/watch. Open til 9 on Thursdays, I'll be there tomorrow getting Woody dialed in after the motor work and Ti exhaust. WOO HOOO!!!!

[Patrick]

Only if Corky is the one doing the work! :icon_bigg

Waylon is good as well.

[Pre-K]

I just called Tejas Motorsports about some new tires and a run on the dyno... they are CHEAP! Michelin 2ct's are 270 + 36 to install, and that is on or off the bike!

[ZXALAN]

I just called Tejas Motorsports about some new tires and a run on the dyno... they are CHEAP! Michelin 2ct's are 270 + 36 to install, and that is on or off the bike!


Tejas has an idiot for a dyno operator/tuner.... Good dyno and facility but....operator is an idiot.

Best place relatively local for HIGH PERFORMANCE tuning is 3rd Coast in Westlake La. They build and tune 400+hp turbo bikes etc...

BUT as mentioned above, if its stock internally, you really don't need it mapped. They MAY get 3-4hp out of it but...its hardly worth the $250.